en
English
French
Spanish
Portuguese
Key data at a glance
One right and one left threaded cap are required per clamping unit. By removing the threaded cap with a magnetic handle, the position of the clamping jaw can be changed in an instant without operating the spindle by sliding it on the base body. The threaded cap is secured by two heavy-duty hexagonal screws, which can be opened and closed with a half turn.
Further Information
PACKAGING UNIT
1 Set
WEIGHT
0.2 kg (0.44 lbs)
MATERIAL
Steel
Notice:
-
Scope of delivery:
Makro•Grip® Ultra
Makro•Grip® Ultra offers countless clamping possibilities and is perfectly fitted for machining applications of flat or large parts and also mould making. Thanks to its expandability and different jaw types, the modular clamping system practically covers any imaginable machining application.
Modularity
Changeover of clamping configuration within seconds through expansion of clamping ranges and exchange of clamping jaws
Application diversity
Equally applicable for single part or multiple clamping, cubic, round our asymmetric workpieces
Centric clamping of large components
Possibility of clamping workpieces of 800 mm or even larger